Two methods for improving ones own plate pinch records.
I haven't tested this yet, so it's experimental.
1
Doing for example 15 and 20 kilogram together
-15 at thumbs side and 15 at pointing, middle, ring and little fingers side.
And later 20 and 20 kilogram
And then 25 and 20 kilogram
-25 at thumbs side and 15 at pointing, middle, ring and little fingers side.
And then 25 and 25 kilogram
2
First doing for example 2 x 15 KG plates wich have a slight ridge.
And then doing 2 x 15 KG plates which are completely flat or completely flat if both outsides are out.
My sports blog, sports notes and writings. Strength sports, fighting sports and more. Jeffrey Koelewijn.
zaterdag 31 augustus 2019
A way to dry the hands
Going through sand with the hands and gripping the sand.
It desn't work as wel as chalk but does dry the hands.
A concrete box with sand in it
It desn't work as wel as chalk but does dry the hands.
A concrete box with sand in it
donderdag 8 augustus 2019
New olympic bench
Olympic bench with a spotter stand/bar system of a power rack, with spotter bars which you can put in the holes.
Safe bench pressing equipment and tips for bench pressing alone and or when bench pressing alone
1 Power rack
-Has holes for spotter bars
2 Olympic bench
-With long enough horizontal spotter stands, bars
3 Squat, bench rack
-With long enough horizontal spotter stands
In my opinion:
A power rack is the best and safest.
Very important for 1, 2 and 3:
Always put the spotter stands/bars at the right hight.
Very important for 2 and 3:
Make sure to get a version where the bar really can't get in between and bypass
the spotter stands, bars at the side of the bar holders.
Extra for 1, 2 and 3:
Make sure that the bar can't go over the bar holders for racking after the lift.
Also: If you change your grip from wide grip to medium or close grip, you very likely
need to put the bar holders higher, so that the bar can't go beyond the bar holders.
Tip for 1 and 3:
-You can use primitive measuring methods to put the bench right in the middle with the feet
or with the hands. And using a ruler is also possible, flexible ones are easier and better.
-And even better maybe you can make quality markings on the ground for the bench so it's easy to put the bench right in the middle.
-
Unracking alone is more dangerous and there's more chance of injury
I myself lay more under the bar for unracking, so that unracking goes better and is easier
and I don't have to go forwards as much. But there's also a downside with this,
you could hit the bar holders on the last part of the lift.
-Has holes for spotter bars
2 Olympic bench
-With long enough horizontal spotter stands, bars
3 Squat, bench rack
-With long enough horizontal spotter stands
In my opinion:
A power rack is the best and safest.
Very important for 1, 2 and 3:
Always put the spotter stands/bars at the right hight.
Very important for 2 and 3:
Make sure to get a version where the bar really can't get in between and bypass
the spotter stands, bars at the side of the bar holders.
Extra for 1, 2 and 3:
Make sure that the bar can't go over the bar holders for racking after the lift.
Also: If you change your grip from wide grip to medium or close grip, you very likely
need to put the bar holders higher, so that the bar can't go beyond the bar holders.
Tip for 1 and 3:
-You can use primitive measuring methods to put the bench right in the middle with the feet
or with the hands. And using a ruler is also possible, flexible ones are easier and better.
-And even better maybe you can make quality markings on the ground for the bench so it's easy to put the bench right in the middle.
-
Unracking alone is more dangerous and there's more chance of injury
I myself lay more under the bar for unracking, so that unracking goes better and is easier
and I don't have to go forwards as much. But there's also a downside with this,
you could hit the bar holders on the last part of the lift.
Bench press benches
Rigid, strong and stable benches are better.
And a flat bench is better for bench press.
-It's one piece. And it doesn't for example have a gap in it.
-
One possible problem with bench press benches:
-When someone has a very wide chest, back and shoulders he
will be less supported by the bench, more of the body sticks out.
-
Looking what's better: Harder or softer bench press padding material.
And maybe all kinds of other padding materials.
Trying wider benches for bigger and broader bench pressers.
-
And a flat bench is better for bench press.
-It's one piece. And it doesn't for example have a gap in it.
-
One possible problem with bench press benches:
-When someone has a very wide chest, back and shoulders he
will be less supported by the bench, more of the body sticks out.
-
Looking what's better: Harder or softer bench press padding material.
And maybe all kinds of other padding materials.
Trying wider benches for bigger and broader bench pressers.
-
maandag 5 augustus 2019
Boxing notes 12 By Jef Koelewijn
Multiple counters:
Block and then punch right away with the blocking or diverding arm.
-Very effective with hook block and then punch.
Block with one arm or hand and then punch with the other arm
Diverd and punch with the arm with which you diverted a punch
Diverd and punch with the other arm
Evade and counter
And if he goes into the punch it hits harder. So if he gives a left hook
and you duck under by to the right side and power punch hook him with the right arm it hits very hard.
And you can diverd a punch so that he goes into the punch of the other arm
-
Less wide stance can create more reach from standing point. Wider stance is less reach from standing point.
Make a punch, hold it and widen and shorten your stance and see your reach from your standing point.
-But there are differences in power
-
Interesting to try:
Opponent circles to the right of you, throw a right hook
Opponent circles to the left of you, throw a left hook
-
Footwork training while there's water to around just below the knee area
-
No hit sparring with partner
-
Punch through the heavy bag sort to speak.
Punch through the opponent sort to speak.
-
Switch hitting training:
Doing singles and or combinations while in normal and southpaw stance
-1 x normal 1 x southpaw and repeat right after each other or with short intervals
-2-3 x normal 2-3 x southpaw and repeat right after each other or with short intervals
Training evading in normal and southpaw stance
-Going from normal to southpaw stance to normal again and so forth
Training blocking and diverding in normal and southpaw stance
-Going from normal to southpaw stance to normal again and so forth
-
Training all footworks to switch stance.
-On the spot
-Forwards
-Backwards
-Sideways
-In an angle
You can also low jump into another stance
-
Doing footwork manouvres
Evade and manouvre
-Every evade and multiple manouvres
-
Jumping into an angle
-
Making an angle and attacking right away
-
Block and then punch right away with the blocking or diverding arm.
-Very effective with hook block and then punch.
Block with one arm or hand and then punch with the other arm
Diverd and punch with the arm with which you diverted a punch
Diverd and punch with the other arm
Evade and counter
And if he goes into the punch it hits harder. So if he gives a left hook
and you duck under by to the right side and power punch hook him with the right arm it hits very hard.
And you can diverd a punch so that he goes into the punch of the other arm
-
Less wide stance can create more reach from standing point. Wider stance is less reach from standing point.
Make a punch, hold it and widen and shorten your stance and see your reach from your standing point.
-But there are differences in power
-
Interesting to try:
Opponent circles to the right of you, throw a right hook
Opponent circles to the left of you, throw a left hook
-
Footwork training while there's water to around just below the knee area
-
No hit sparring with partner
-
Punch through the heavy bag sort to speak.
Punch through the opponent sort to speak.
-
Switch hitting training:
Doing singles and or combinations while in normal and southpaw stance
-1 x normal 1 x southpaw and repeat right after each other or with short intervals
-2-3 x normal 2-3 x southpaw and repeat right after each other or with short intervals
Training evading in normal and southpaw stance
-Going from normal to southpaw stance to normal again and so forth
Training blocking and diverding in normal and southpaw stance
-Going from normal to southpaw stance to normal again and so forth
-
Training all footworks to switch stance.
-On the spot
-Forwards
-Backwards
-Sideways
-In an angle
You can also low jump into another stance
-
Doing footwork manouvres
Evade and manouvre
-Every evade and multiple manouvres
-
Jumping into an angle
-
Making an angle and attacking right away
-
Abonneren op:
Reacties (Atom)